Télécharger Imprimer la page

DesQ 75010 Mode D'emploi page 2

Publicité

Operation instruction
Perforate
1. Select correct paper format:
Format
Paperlength
A4
296 mm
285 mm
Cover
279 mm
Letter
2. Place the papers flat on the table of the binding machine and insert
them straight.
Maximum 8 paper sheets of 80 gram per m2 at once.
Maximum 2 pieces of PVC covers of 0,3 mm thickness (per piece) at once.
3. Pull the handle downwards, the sheets are now being punched.
Release the handle and take the sheets out of the machine.
Bind
1. Select the correct plastic binding comb.
See index below for the correct size binding and numbers of sheets.
Number sheets
inch Ø
mm Ø
80gr/m2
1-20
6
1/4
20-40
8
5/16
40-60
10
3/8
60-80
11
7/16
80-100
12
1/2
100-120
14
9/16
120-140
5/8
16
140-160
23/32
18
2. Place the binding comb with the open part on top of the binding machine.
The teeth of the binding machine must fit into the rings of the binding comb.
3. Push the handle downwards to create maximum opening ofthe binding comb.
The handle can be "locked" with the button on top of the machine on the
left hand side.
4. Place the rings of the binding comb through the perforated holes ofall the
sheets. Hold the handle at the right side and change thebutton from "locked"
to "open". Release the handle upwards and you are able to take out the
complete document.
Maximum 150 sheets at once binding.
Maximum diameter binding comb 18 mm.
Attention:
1. Empty the waste draw, located at the backside of
the machine, regularly.
2. Keep out of the reach of children.
Gebruiksaanwijzing inbindmachine
Perforeren
1. Selecteer juiste papierformaat:
Formaat
Papierlengte
A4
296 mm
285 mm
Cover
279 mm
Letter
2. Leg de vellen die u wilt perforeren plat op het blad van de inbindmachine en
duw deze recht tegen de binnenrand.
Maximaal 8 vellen van 80 gram per m2 papier tegelijkertijd.
Maximaal 2 kunststof kaften van 0,3 mm dik (per stuk) tegelijkertijd.
3. Haal de hendel naar beneden. De vellen worden geperforeerd.
Laat de hendel weer los en u kunt de vellen uit de machine nemen.
Inbinden
1. Selecteer de juiste formaat kunststof inbindrug.
Zie onderstaande tabel voor de juiste maat doorsnede van de ring bij welk
aantal pagina's.
Aantal vel
mm Ø
inch Ø
80gr/m2
1-20
1/4
6
20-40
5/16
8
40-60
10
3/8
60-80
11
7/16
80-100
12
1/2
100-120
14
9/16
120-140
16
5/8
140-160
18
23/32
2. Plaats de inbindrug met de opening naar boven bovenop de inbindmachine.
De tanden van de inbindmachine moeten in de ringen van de inbindrug vallen.
3. Haal de hendel naar beneden, zodat u een maximale opening creëert.
U kunt de hendel vastzetten door de knop links bovenop de machine op
"locked" te zetten.
4. Laat de ringen van de inbindrug door de perforatie van het geperforeerde
materiaal vallen totdat alles is toegevoegd. Houd de hendel rechts vast en
schakel de knop van "locked" naar "open". Vervolgens brengt u de hendel
naar boven en kunt u het ingebonden document uitnemen.
Maximaal 150 vellen tegelijkertijd inbinden.
Maximale diameter inbindrug 18 mm.
Let op:
1. Leeg de papierlade aan de achterzijde regelmatig
2. Buiten bereik van kinderen houden

Publicité

loading