Functional Description - Sonnenkonig AIR FRESH 12 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour AIR FRESH 12:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7 Functional description

Pressing this button turns the unit on at low ventilation speed. Pressing it again
turns the unit off.
ON/OFF
EN
Press this button to switch the unit from LOW to MID to HI speed, in Normal Mode.
SPEED
Press to select the sleep mode. This changes regularly between the different
SLEEP
ventilation levels.
MODE
Press this button to start the oscillation in up and down direction. Press it again to
OSC
stop the oscillation.
Press this button to start the oscillation in left and right direction. Press it again to
OSC
stop the oscillation.
Before activating this function, ensure there is enough water in the lower water
tank. Press this button and the water pump starts running. The water circulates
COOLER
from the cooler master to allow warm air to be converted to cool air (warm air
combined with water vapor) and to cool down the temperature effectively. If you
have used the cooler function, when you stop the product, the Air freshener will
continue working for 5 minutes to dry the cooler master. If you press the "Off"
button twice, the product will be forced to stop.
** For better cooling effect, we recommend adding an ice box or ice in the upper
water tank.
Caution: the unit has a water shortage warning system. If there is not enough
water, the COOLER function will be automatically stopped, and 3 beep warning
sound will be heard, and the cooler display will flash.
When the unit is in use, you can set the Timer to turn off the Air freshener after
a specified time. Press this button repeatedly to increase the Timer setting in 0.5
TIMER
hour increments (up to a maximum of 8 hours) as indicated on the display. Once
the Timer has run out, the unit will turn off.
With this key you can deactivate the display of the device. Press the button once to
turn off the display. Press again to turn it back on.
POWER
SAVE MODE
Press this button for 3 seconds to lock the control panel in the event of a child
operating error. Press again for 3 seconds to disable this function.
LOCK
LOW
MID
HIGH
48

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10301201

Table des Matières