Product Description; Scope Of Supply; Product Functions - Sentiotec 51159 Notice De Montage

Instructions for installation and use

3. Product description

3.1. Scope of supply

● Single-component sauna control
● Heater sensor with integrated safety temperature limiter and connection
terminal
● Supply cable
● Installation accessories

3.2. Product functions

The sauna control Modern Finnish Plug'n'Play controls and regulates sauna
heaters in the temperature range 40 °C to 125 °C above the heater. The control
works according to the single sensor system and has an excess temperature
fuse with a switch-off temperature of 139 °C above the heater.
If the cabin temperature is less than the set target temperature, the sauna control
switches on the sauna heater. The sauna heater heats up. If the cabin tempera-
ture exceeds the set target temperature, the sauna control switches the sauna
heater off. The sauna heater does not heat up until the cabin temperature falls
below the set target temperature again.
For safety reasons, the automatic heating time limiter automatically switches off
the sauna control after a heating time of 6 hours. The sauna control needs to
be reactivated thereafter (see point Heating time exceeded on page 13).
WORLD OF WELLNESS
p. 6/14