Product Operation - Royal Sovereign RAF-25P Manuel Du Propriétaire

PRODUCT OPERATION

1. Place shredder on a flat, level surface.
2. Plug the power cable into the wall power
outlet.
3. Turn the master control switch ON
(located under the lip on the top side of the
unit). Next press the "ON/OFF" button
(located on top of the shredder).
NOTE: The Power Indicator LED light will
turn ON when the machine is ready to use.
If the basket is pulled out or not inserted
correctly, the LED Power Indicator light will
not turn on.
Auto-Feed Entry
1. Press the "ON/OFF" button.
2. Neatly arrange paper to be shredded in a
stack of up to 120 sheets.
3. Push down on the middle of the safety
cover
(as shown in image)
stack of paper into the Auto-Feed Entry.
Make sure to push the papers all the way
down into the entry. The shredder will
automatically begin to start shredding a
few pieces of paper in the stack at a time.
and insert the
Master Power
Switch
ON/OFF
7