Publicité
STEERING
9. After tightening the nut, check the steering
for smooth movement. If not, adjust the
steering by loosening the ring nut little by
little.
10. Adjust:
• Front fork top end a
Front fork top end (standard) a:
Zero mm (Zero in)
11. Tighten:
• Pinch bolt (handle crown) 1
• Pinch bolt (under bracket) 2
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5 - 53
CHAS
21 Nm (2.1 m · kg, 15 ft · lb)
21 Nm (2.1 m · kg, 15 ft · lb)
Publicité
Chapitres
