Publicité
YM-01501, 90890-01501
Tool name/How to use
This tool is used to loosen or tighten the damper
assembly.
This tool is used when install the fork oil seal.
Use this tool to inspect the coil resistance, output
voltage and amperage.
This tool is necessary for checking ignition timing.
This tool is needed to remove and install the valve
assemblies.
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
Intake 4.5 mm (0.18 in)
Exhaust 5.0 mm (0.20 in)
This tool is needed to remove and install the valve
guide.
Intake
Exhaust
This tool is needed to install the valve guide.
This tool is needed to rebore the new valve guide.
SPECIAL TOOLS
YM-01501
YM-A0948
YU-3112-C
YM-33277-A
YM-4019
YM-91042
YM-4116
YM-4097
YM-4117
YM-4098
YM-4118
YM-4099
1 - 8
GEN
INFO
Illustration
90890-01501
90890-01502
90890-03112
90890-03141
90890-04019
90890-04086
90890-04116
90890-04097
90890-04117
90890-04098
90890-04118
90890-04099
Publicité
Chapitres
