Operation Details - Bem kickstand mini Manuel De L'utilisateur

Projection Size
Adjusting the overall size of the projected image is easy! Move the Kickstand MINI farther from the target surface
to get a larger picture or closer to get a smaller picture. The optimal range and projection size is generally 32" (at 1
yard) to 96" (at 3 yards). Under ideal viewing conditions, good results may be obtained at even greater distances
Adjust the Focus
If the projected image is blurry, simply rotate the FOCUS knob left or right until it becomes clear. If you aren't able to
obtain a good image by adjusting the focus, the lens may need cleaning (see Maintenance).
Keystoning
Your Kickstand MINI should be positioned so it is pointed directly at the target screen. If the projector is tilted up or
down, the top and bottom of the image will not be the same size. This distortion is called "keystoning." In most cases,
you can eliminate keystoning by ensuring that the projector is properly aligned with the screen; however, key-stone
adjustments can also be made using the remote control.
Press the KEYSTONE ADJUSTMENT button to turn keystone auto adjust on / off. Manual keystone adjustments
can be made by accessing "Settings, Keystone, Man Keystone" from the main Android media screen. With man-ual
adjustments, you can adjust the keystone by ±30 degrees.

Operation Details

Now that you and your Kickstand MINI are better aquatinted, it's time to learn how quick and easy it is to set up and
use. Follow these simple step-by-step instructions and you'll be up and running (and projecting) in no time!
Connect the Power Adaptor
Carefully plug the supplied power adapter into a standard wall outlet. Then, carefully plug the power adaptor into the
"DC 12V" port on the back of the projector.
NOTE: Your Kickstand MINI can run on its internal battery for up to 2 hours
Power On
Press and hold the POWER button on your Kickstand MINI to turn it on (you must
press the power button on the pro-jector, not the remote, to turn it on). The LED
indicator will turn blue* when on and a bem wireless startup screen will appear.
After a few moments, the projector will show the main Android media screen
(shown here).
8
*The LED indicator will turn purple if your
Kickstand MINI is charging while in use.
Power Off
When you're finished using your Kickstand MINI, press and hold the POWER button
on either the projector or the re-mote to turn it off.
NOTE: After the projector is unpacked and turned on for the first time, a slight
odor may be emitted from the air vent. This is a normal result of the manufacturing
process. The odor is nontoxic and will soon disappear with use.