Asus P1-P5945G Manuel D'installation page 5

Installing the CPU
1. Unlock the load lever, then lift
to a 90º-100º angle.
Retention tab
3. Install the CPU. The CPU fits in
only one orientation.
5. Reinstall the CPU fan and heatsink assembly, then reconnect the CPU
fan cable to the CPU fan connector on the motherboard. Refer to the
instructions in the previous section for details.
Installing a DIMM
1. Locate the DIMM sockets in the
motherboard.
2. Unlock a DIMM socket by
pressing the retaining clips
outward.
3. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on the
socket.
2. Lift the load plate, then
remove the PnP cap.
Load lever
4. Close the load plate, then lock
the load lever.
Installation manual
Unlocked
retaining clip
DDR DIMM notch
5