Waring Commercial BLADE BB300 Serie Directives D'utilisation page 5

BB300 OPERATION
1. With the switch in the OFF
position, place container
on blender base. Be sure
container is fully seated and
that drive coupling is properly
engaged. Plug blender cord
into outlet.
2. P ut ingredients into jar and cover it. Do not fill above
MAX FILL line.
3. T his blender has 2 speed settings: HIGH and LOW.
Press toggle switch to desired position. To crush ice,
always use HIGH speed setting.
4. Wh en finished blending, set toggle switch to OFF
position.
5. This blender is equipped with a PULSE option. Hold
toggle switch in down position to engage PULSE
function. Unit will run on HIGH speed until the toggle
switch is released.
NOTE: This blender utilizes a Slow Start
beginning HIGH or LOW operation, the unit will start in a
lower speed for 1 second and then switch to the full selected
speed. PULSE utilizes a .5-second Slow Start
for a more even blending of ingredients in jar.
6. Allow motor to come to a complete stop before
removing container from blender base. Never place
the container on the motor base or remove it from
the motor base while motor is running.
7. Always hold container with one hand when starting and
while blending. Never operate without jar lid.
8. W ash and dry container after each use. See Cleaning
and Sanitizing Instructions.
9. Unplug to turn off all power to blender.
feature. When
™
5
. This allows
™