Husqvarna 27005979000 Mode D'emploi page 5

Scope of supply

1x titanium main silencer

1x mounting kit
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
- Let the exhaust system cool down. Do not touch hot parts.
Preparatory work
- Raise the motorcycle with a lift stand (see the Owner's Manual).
- Take off the seat (see the Owner's Manual).
Assembly

- Remove screws .

- Remove screw .
- Pull off side cover (with exhaust heat shield) in area

and lift out of holding lug

- Release screw .

- Remove screw .
- Take off the main silencer.
- Position titanium main silencer

- Mount screw and washer
mounting kit) and tighten to 25 Nm.

- Position screw clamp (included with mounting kit) and tighten
screw to 12 Nm (copper paste).

sideways
.

(included).
 
with bushing (included with
5