Assembling The Device - Umuzi Cleaning UZ-CL-STCL01 Manuel D'utilisation

Assembling the device

Turn the handle (2) of the main body holder (B)
counterclockwise,
until it locks in place (you hear a click).
Attach the steam head
Attach the mop head (M) to the main body holder (B) as follows: Insert the steam head swivel into the
designated hole in the main body (B) until it locks into place with the lock button (you will hear a click).
The mop head (M) can be removed from the main body (B) by pressing the lock button on the back of the
main body (B).
Attach the micro-fiber cloth pad
Because of the barb design at the bottom of the mop head (M), just place the micro-fiber cleaning pad (K)
on the mop head (M), they can bond hard. Place the front of your shoe gently on the mop head (M) and
press it down gently.
Attaching and removing the carpet glider
Place the carpet glider (N) on the floor, with the closing lips on top.
Lift up the device and place the mop head (M) with the attached micro-fiber cleaning pad (K) onto the
carpet gilder (N) with some vertical pressure, until it locks into place.
To remove the carper glider (N), place the front of your shoe onto the cleaning pad removal tab and press
down firmly, and the carpet gilder will be removed from steam head.
NOTE! Do not operate the device with the carpet glider, without the micro-fiber cloth in place!
EN-6