Steam-Cleaning - Samsung NE63 871 Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour NE63 871 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to run a self-cleaning cycle
1.
Make sure the oven door is closed completely and unlocked. And turn off all
oven and cooktop function.
2.
Tap
, and select Cleaning > Self Clean using the dial knob.
Then, select the cleaning time. (2 hour / 3 hour / 5 hour)
3.
Tap START/SET.
The oven door is locked automatically and the oven begins to heat up.
NOTE
You will not be able to start a self-cleaning cycle if the oven lock feature
is activated or if the oven's temperature is too hot.
The oven door locks automatically. The display will show the cleaning
time remaining. It is not be possible to open the oven door until the
temperature drops to a safe/cool temperature.
The self-cleaning feature will not operate when the warming center is on.
4.
When the self-cleaning cycle is done, End will appear in the display and the
range will beep several times.
How to delay the start of self-cleaning
Repeat steps 1 and 2 on 'How to run a self-cleaning cycle'.
1.
2.
Select Set Delay Start.
3.
Set the time you want the oven to start self-cleaning using the dial knob.
4.
Tap START/SET.
The oven will start self-cleaning at your specified time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven.
1.
Press OFF.
2.
You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
After a self-cleaning cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth
after the oven cools. (If white spots remain, remove them with a soap-filled
steel wool pad and rinse thoroughly with a vinegar and water mixture.)
If the oven is not clean after one cycle, repeat the cycle.
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.

Steam-cleaning

How to set the oven for steam-cleaning
For light cleaning, the steam-cleaning function saves time and energy. For heavier-
duty cleaning, use the self-cleaning function.
1.
Remove all accessories from the oven.
Pour approximately 10 oz. (300 ml) of
2.
water onto the bottom of the empty
oven and then close the oven door.
Use normal water only, not distilled
water.
3.
Tap
, and select Cleaning > Steam
Clean using the dial knob.
4.
Tap START/SET.
The oven door is locked automatically
and the oven begins to heat up.
When the operation is complete, the
display will blink and a beep will sound.
5.
Press OFF.
Clean the oven's interior.
6.
There will be a significant amount of
water remaining on the bottom of the
oven after a steam-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
English 49

Publicité

Table des Matières
loading

Table des Matières