Advanced Features - Slendertone ABS3 Mode D'emploi

Masquer les pouces Voir aussi pour ABS3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

T
HE INFORMATION BUTTON
Your controller stores information about current and previous
sessions which is accessed using this button. You can access
the information while a program is running. The information is
displayed for three seconds and then reverts back to the
program timer.
Current intensity levels
Press the information button once to display
the intensity of the current program.
Average intensity levels
Press twice to see the average intensity
used on both the right and left sides of
the belt over the past 3 sessions.
Highest intensity levels
Press three times to display the highest
intensity to date from either side of the belt.
Number of sessions to date
Press four times to see how many sessions you
have completed to date. Please note
that the controller will reset itself to 0 after
250 sessions.
www.slendertone.com
English
A
DVANCED FEATURES
Intensity Keylock Function
If you find a comfortable intensity level, press
the upper and lower halves of the LEFT intensity
button at the same time to lock that intensity.
This will also lock the program button. This
function is only active during the session in
which it was activated. Deactivate the keylock
by performing the same action again.
Mute Function
If you want to switch off your controller's
sound effects, press the Information button
and the Program button at the same time. The
mute function remains active indefinitely unless
manually changed. Deactivate the mute function
by performing the same action again.
P
AD CONTACT INDICATOR
If the Pad Contact symbol (
) has appeared on the display, there is a
problem with the connection between the GelPads and your skin, or
between the GelPads and the belt. The Pad Contact symbol always
appears in conjunction with the left or right arrow on the display screen
as follows: If the left arrow appears, there is a problem with the left
GelPad. If the right arrow appears there is a problem with the right
GelPad and if both arrows appear, there is a problem with either the
middle GelPad or all three GelPads.
9

Publicité

Table des Matières
loading

Table des Matières