Remote Control Batteries; Cleaning And Storage; Specifications; Grounding Instructions - Ener-G+ HEA-21522 Manuel D'utilisation

11. DO NOT cover the unit with any type of cloth while in operation or a short time after turning the unit off.
12. DO NOT wrap the power cord around the unit.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening of the unit as this may cause electric
shock, fire or damage to the heater.
14. PLEASE HANDLE THE UNIT WITH CARE.
15. DO NOT operate the heater with a damaged power cord or an AC wall outlet. DO NOT operate the heater if it has
been dropped or damaged in any manner.
16. DO NOT USE THE UNIT AS A ROOM HEATER.
17. Do not run the power cord under carpeting; do not cover the cord with throw rugs, runners or the like. Arrange cord
away from traffic area where it may be tripped over.
18. To disconnect heater, turn the power switch to off, then unplug the unit.
19. To prevent possible fire, do not block air intakes or exhaust openings in any manner. Do not use on soft surfaces, like
a bed, where openings may become blocked.
20. Use this heater only as described in this manual; any other use not recommended by the manufacturer may cause
fire, electric shock or injury to persons.

21. REMOTE CONTROL BATTERIES:

-Always purchase the correct size and grade of battery for the included remote control.
-Replace all batteries of a set at the same time.
-Clean the battery contacts and also those of the remote prior to battery installation.
-Make sure the batteries are installed correctly with regard to polarity (+ and -).
-Remove the batteries from the remote if not used for an extended period of time.
-Remove used batteries promptly.
SAVE THESE INSTRUCTIONS

5. CLEANING AND STORAGE

1. Turn the unit OFF and unplug the unit before cleaning.
2. Use only a soft cloth to clean the exterior. An air compressor or a vacuum cleaner can be used to clean the
interior.
3. Do not use gasoline, paint thinner or other chemicals to clean the heater
4. Store the heater in its original box and store in a cool, dry place.

6. SPECIFICATIONS

Power supply:
Wattage:
Net weight:
Gross weight (with carton):

7. GROUNDING INSTRUCTIONS

This product is for use on a nominal 120V circuit with a grounding plug that looks like the plug illustrated below. Make
sure that the product is connected to an outlet having the same configuration as the plug. If you use an extension cord,
the cord should be at least NO .14 AWG and rated for no less than 1875 Watts. Also make sure it also has a grounding
plug. No adaptor should be used with this product.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electrocution. Check with a
qualified electrician or service personnel if you doubt the outlet is not properly grounded. Do not modify the power
120V / 60Hz
600, 900, 1500Watts
2.5 kg
3.5 kg
P a g e | 3