Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTENT
1
Components
.
2. Assembly
1. COMPONENTS
1. Make sure that all the parts are present and that there are no missing parts. Please empty the packing box
thoroughly and make sure that all the parts are present and that there are no missing parts.
2. Do not PLUG THE UNIT IN UNTIL THE UNIT IS COMPLETELY ASSEMBLED AND MAKE SURE THERE IS
NO DAMAGE to the unit and power cord.
IF THERE IS ANY DAMAGE OR MISSING PARTS, PLEASE CONTACT ENERG+ CUSTOMER SERVICE AT
866-967-7333 ext. 227. (SEE WARRANTY SECTION)
2. ASSEMBLY
MAKE SURE THE HEATER IS NOT FUNCTIONING BEFORE YOU HANG IT ON A GAZEBO, UNDERNEATH A
BALCONY OR A ROOF.
1. Make sure Hook 'A' is well attached to the heater.
2. Attach Hook 'B' onto a secure post, beam or any solid attachment object. You can also attach hook 'B' on Hook
'A' going around an obstacle or around itself to install the heater.
3. Connect the heater to an AC 120V/60Hz wall outlet.
NOTE: wait until the heater heating element has cooled down before moving it.
REMEMBER, portable electric heaters are designed for spot heating or as a supplementary heat source. They are not
intended to be the main source of heat during cold months.
1
1 - 2
2
2 - 3
3
3
3 - 4
4
5
P a g e
| 1
Publicité
Chapitres
Table des Matières
