Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 4 fixing brackets
- 2 screws 6x15 big head black
- 4 silent blocks
- 2 steel washers Ø5
- 1 steel screw 6x15 little head
Fitting instructions
- Aluminium nettings can be put in option at the air intakes, with silicone.
- Insert the threaded fastener on the fixing bracket front right.
- Fit the fixing brackets on the motor casing as shown below. The fixing bracket front right is assembled with
the provided steel screw 6x15 little head.
- Put together both parts of the belly pan with 2 screws 5x15 big head black, the 2 steel washers Ø5, the 2 plastic
washers Ø5 and 2 self-locking nuts Ø5. The steel washers are placed inside the belly pan, between this one and
the self-locking nuts.
- Fit the 4 silent blocks on the belly pan.
- Place the assembled belly pan at the level of the fixing brackets, then fix it thanks to 2 screws 5x15 and the 2
screws 6x15. Center the belly pan before the final tightening of screws.
Once fitted, the belly pan must have no contact with engine and has to be far enough from
complet exhaust system. Fitting brackets' angles may be a little modified in order to adjust
the accessory to every motorbike (do not fold the fixing brackets while fitted on belly pan).
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* Belly pans will be neither retaken nor exchanged in case of rubbing during a "sports" driving, or during the clearing of pavements, uneven road surfaces ... The fitting of Ermax accessories is planned for a normal road use.
* Move hoses so that they do not fall inside the belly pans. Any deterioration due to flows of corrosive products is not guaranteed.
- 4 screws 5x15 big head black
- 1 threaded fastener Ø5
- 2 self-locking nuts Ø5
- 2 plastic washers Ø5
- 2 nettings 6 cm x 10 cm
Fixing brackets at left
FITTING INSTRUCTIONS
ADAPTABLE ON MSX 125 2013 → ∞
« CAUTION »
ERMAX BELLY PAN
Estimated fitting time : 1 heure
Fastener
Fixing brackets at right
Publicité
