EDM Product 07588 Mode D'emploi page 14

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
REF. 07588
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
SAFETY
IN ORDER TO OPERATE THIS APPLIANCE SAFETY, IT IS ADVISABLE TO FOLLOW
THE FOLLOWING POINTS:
1. Wait until the blade has stopped revolving before removing the cover.
2. Unplug the appliance after each use.
3. Never place any liquid or juicy food in the container.
4. Never immerse the motor body into the water or dish-washer.
IMPORTANT
THE CUTTER IS MADE OF HARDWEARING STEEL AND IS VERY SHARP.
BE VERY CAREFUL WHEN HANDLING THE BLADES.
FITTING THE CUTTER
Unplug the appliance
Fix the cutter on the central spindle inside the chopping
container, and press the whiteNupper part.
The cutter is locked into position and the appliance
is safe to use when you hear the blades click into position.
To remove the cutter, press the white button while pulling the blades upwards.
INSTRUCTIONS FOR USEO
1. Place the motor body on your working surface.
2. Then fix the container on top.
3. Position the blades on the central axle inside the chopper container, click into
position by slightly pressing the white part.
4. Place the prepared ingredients in the container.
5. Put the cover on.
6. Connect the appliance to the main supply.
7. Press down the cover evenly with the flat of the hand to bring the machine into
operation.
8. To stop the appliance, release the pressure on the cover.
9. Wait until the blade has stopped revolving before removing the cover.
10. Disconnect the appliance after each use.