Troubleshooting - Samsung HW-J430 Manuel D'utilisation

Wireless audio - soundbar
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING

Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
A function does not work when the button is pressed.
• Is there static electricity in the air?
Sound is not produced.
• Is the Mute function on?
• Is the volume set to minimum?
The remote control does not work.
• Are the batteries drained?
• Is the distance between the remote control and main
unit too far?
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
• Is your TV firmware the latest version?
• Does an error occur when connecting?
• Reset the TV MODE and connect again.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the
main body of the product.
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
¼ Connect the power plug to the outlet.
¼ Disconnect the power plug and connect it again.
¼ Press the Mute button to cancel the function.
¼ Adjust the Volume.
¼ Replace with new batteries.
¼ Move closer to the unit.
¼ TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it
supports TV SoundConnect.
¼ Update your TV with the latest firmware.
¼ Contact the Samsung call center.
¼ Press and hold the +# button for 5 seconds to reset
the TV SoundConnect connection.
¼ Try to connect your subwoofer again.
(See Page 11)
¼ Press the WOOFER button on your remote control
to adjust its value (between SW-12 and SW+6).
21
TROUBLESHOOTING

Publicité

Chapitres

Table des Matières
loading

Table des Matières