Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1 Setting Up the Travelling Cot
•
Remove the cot from the bag.
•
Open the Velcro fasteners and remove the mattress (Fig. 1)
•
Set up the travelling cot upright. Do not yet press the floor of the playing surface down
towards the bottom (Fig. 2).
•
Pull the shorter sides apart until they engage audibly (fig. 3a). Then pull the longer sides
upwards until they engage audibly (fig. 3b). Check all sides to make sure that each individually
has engaged. Fix the mattress by guiding the Velcro fasteners through the two holes on either
side of the travelling cot floor and close them.
•
Now press the floor down until it engages audibly (Fig. 4).
•
Place the mattress in the travelling cot (Fig. 5).
2
Folding the Travelling Cot together
•
Remove the mattress from the cot (Fig. 6)
•
Pull the strap at the bottom of the travelling cot towards the top, until the floor is halfway up
(Fig. 7).
•
In order to unlock the lateral sides, look for the press buttons underneath the upper frame
surface.
•
Press the button upwards and push the relevant lateral side down. Repeat this process with
the other three sides (Fig. 8a and 8b).
•
In order to fold the travelling cot together, pull the strap in the centre of the floor and fold all
four parts together (Fig. 9).
•
Wrap the mattress around the folded up travelling cot and hold it in place with Velcro
fasteners (Fig. 10).
•
Place the travelling cot in the carrying bag for transportation.
Please observe the safety advice and the instructions for maintenance and care!
1
GB
2
7
Publicité
Table des Matières
