Safety; Intended Use; Basic Safety Measures; Keep Information Available - WATERKOTTE F41449 Planification Et Installation

Safety

1 Safety

1.1 Intended use

1.2 Basic safety measures

1.2.1 Keep information available

1.2.2 Before initial use

1.2.3 Environmental protection

24.10.2018
Your WATERKOTTE domestic water heater is used to provide hygienic
domestic water heating.
The heat pump, which is connected to a heat source that is available year-
round, serves as heat generator.
Commissioning may only be carried out by trained professionals. Damages
caused by non-compliance with above mentioned items are not covered by
the warranty (see enclosed Exclusion of Warranty).
The corrosion resistance of soldered plate heat exchangers to water con-
tents can be taken from the table entitled "Heat exchanger operating limits".
The warranty does not cover damage caused by deposits and calcifica-
tions.
Keep all safety and operating signs on the domestic water heater in fully
legible condition at all times. Replace damaged or illegible signs immedi-
ately.
Before initial use of your WATERKOTTE domestic water heater, familiarise
yourself with:
 The operating and control elements of your WATERKOTTE domestic
water heater.
 The immediate surroundings of the domestic water heater
Before initial start, perform the following steps:
 Check the domestic water heater for visible damage. Eliminate any
detected defects immediately.
The domestic water heater may only be operated in perfect condition!
 Ensure that only authorised personnel is in the work area of the
domestic water heater, and that no other persons are endangered
during commissioning.
 Remove all objects and other materials that are not required for opera-
tion of the domestic water heater from the work area of the domestic
water heater.
 Observe the regulations regarding waste avoidance and proper waste
recycling or disposal when performing any kind of work on and with the
domestic water heater.
5 / 20
Copyright  2018 by: WATERKOTTE GmbH Subject to changes.