Pattfield Ergo Tools PE-AHS 20 Li Traduction De La Notice Originale page 79

ATTACH BATTERY
1 Slide the charged battery 5
battery slot until it clicks into place.
Caution! Only use the batteries de-
scribed in technical data.
SWITCHING ON
1 1. Push and hold the release switch 9.
2. Push and hold the on/ off switch
start the tool.
CUTTING TECHNIQUES
1 Hold the hedge trimmer at an angle of
5°–10° to the hedge.
Cut the hedge from bottom to top, sides
first.
CUTTING DEVICE COVER
1 If the hedge trimmer is stored or not in
use, make sure that the cutting device
cover 10 is installed.
Caution! To prevent injuries, slide
the cutting device cover over the
blade after every use.
Warning! Hold the hedge trimmer firmly with both hands! Ensure that the cutting bar
does not touch any objects or the ground and that there are no people or animals in
the vicinity before starting! Risk of injury!
156 EN
RELEASE BATTERY
into the 2 For removal press the battery release
button 6 and pull out the battery.
SWITCHING OFF
2 Release both release switch
7 to off switch 7 to turn off the hedge trim-
mer.
Note: The motor stops operating if one
of the switches is released.
2 Cut the top in an oscillating movement,
advancing slowly.
1
9 and on/ 1
1
1
2
2
1.
2.
2
1.
2.
EN 157