Information Codes - Samsung FlexDry DVE60A9900 Serie Manuel De L'utilisateur

Troubleshooting
Problem
Extended time.
If a problem persists, contact a local Samsung service center.

Information codes

If the dryer fails to operate, you may see an information code on the display panel. To determine what you
should do, check the list of codes in the table below, and then try the suggested actions.
Information code
Door is open
FC
AC
HC
9C1
tC
tC5
dF
If any information code keeps appearing on the display, contact a Samsung service center.
64 English
Untitled-5 64
• Some cycles automatically sense the moisture in the load and shut the
dryer off when the selected dryness level is reached.
The drying time can change according to the type and amount of
laundry. See the cycle chart for reference.
Meaning
Operating the dryer with the door
open.
Invalid power source frequency.
Electronic control problem (Invalid
Communication).
High temperature heating check.
The electronic control needs to be
checked.
The Thermistor1 resistance is very
low or high.
The Thermistor2 resistance is very
low or high.
Incorrect door switch.
Action
Action
• Make sure the door is properly closed.
• Make sure laundry is not caught in the
door
• Try restarting the cycle.
• If this information code remains, contact a
Samsung service center.
Contact a Samsung service center.
• Clean the lint filter.
• If this information code remains, contact a
Samsung service center.
• Check if power cord is connected properly.
• Check if the electrical outlet is working
properly.
• If the information code remains, contact a
Samsung service center.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a
Samsung service center.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a
Samsung service center.
Contact a Samsung service center.
2021-05-25 5:20:44