Sort And Load; Lint Filter - Samsung FlexDry DVE60A9900 Serie Manuel De L'utilisateur

Sort and load

• Put one wash load in the dryer at a time.
• Do not mix heavy and lightweight items together.
• To improve drying efficiency for one or two items, add a dry towel to the load.
• For best results, untangle items before inserting them into the dryer. Tangled items may degrade the
drying efficiency or cause the door to open.
• Overloading reduces the tumbling action, resulting in uneven drying and wrinkling.
• Unless recommended on the care label, do not dry woolens or fiberglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol, gasoline, etc.

Lint filter

Untitled-5 37
To prevent a risk of fire, make sure to clean the lint filter
before or after every load.
1. Turn off the dryer.
2. Open the door and pull out the lint filter (A) from
3. Open the lint filter by separating it at the top.
4. Close the lint filter, reinsert the lint filter into the
A
• Do not operate the dryer without the lint filter in
• Do not use a damaged or broken lint filter. This may
inside the drum.
Remove the lint, and then clean the lint filter.
dryer, and then close the dryer door.
CAUTION
place.
reduce performance and/or cause fire.
English 37
2021-05-25 5:20:40