Control Panel - Dutch originals DO-CH-TF029-W Manuel De L'utilisateur

3) INSTALLING AND USING THE DEVICE
First use
Open the packaging carefully before taking out the device. Make sure the device is
complete and undamaged. If any components are missing or damaged, contact the vendor
and do not use the product. Retain the packaging or recycle it in accordance with local
regulations.
• Remove all packaging from the device.
• Clean the device with a damp cloth. Please refer to the 'cleaning and maintenance'
section.
• Continue with the procedure in the 'using the device' section.
Mounting the base
Before using the device, the base needs to be mounted on the device.
• Spread a soft cloth or mat on the floor.
• Carefully place the device upside down on the cloth or mat to prevent it from getting
damaged.
• Click the two base parts together and make sure the pins are fully inserted. Lead the
power cord through the opening in the middle of the base (1)
• Put the device in the base (2)
• Remove the fixing nut off the device (3), attach the base to the fasteners in the body and
tighten the nut so that the base is properly attached to the device.
1
Using the device
Place the device on a firm and solid surface, in an area with at least 50 cm of free space
around the device, generating a proper air circulation.
Do not operate the device close to walls, curtains or other objects that might block the air
inlets and air outlet, resulting in a bad air circulation.
Control & display panel

CONTROL PANEL:

0 Power OFF
1 FAN speed low
2 FAN speed medium
3 FAN speed high
1 <-> FAN speed Low – Oscillating
2 <-> FAN speed medium – Oscillating
3 <-> FAN speed high – Oscillating
2
EN 05
3