Albrecht Audio MAX-Sound 900S Manuel page 25

The next page shows the network configuration.
Choose WiFi and tap "Next" to continue.
Tapping Set up another speaker will show the first page of the setup, or tapping Go to my home
will return to the first page of the APP.
Once the setup is completed, the APP will show the WiFi speaker on the list. And the blue LED on
the speaker turns on.
Hints: During the completion of setup, iOS/Android device will automatically connect to your own
network. In some environment there may be more than one network available. The device may
choose the network which is not connected to the speaker. The App will show a failed message in
the last step of setup. Then, it is suggested to check to which network the iOS/Android device is
being connected. The connected speaker and the device must be in the same network.
Tap on the desired speaker to setup. A progress circle should appear on
the right side. After the connection is complete it should show a check
mark in front of it.
It enters the page to change the radio's name. The edit box will be filled
with the current given name.
Tap "Next" to continue.
After the scan is complete, a list of WiFi net-
works is shown. Tap on a listed item to select
the network to which the speaker shall be con-
nected. Enter the WiFi passcode and tap "Next".
If you don't know your WiFi passcode you can
often find it printed on your WiFi router.
English 25