Table des Matières
Publicité
7.2
Déclaration CE du module UMTS
The undersigned, representing the manufacturer:
Herewith declare that the product:
Type:
Global Data Transmitter Single Prime (UMTS; Five-Band 3G)
Art.nr.:
11.34.02
Function(s):
connecting element between sensor (e+-logger or diver) and the GDT Server in the Eijkelkamp Smart Sensoring.
The most important functions of the modem:
-
Passing through the collected data of the connected sensor to the GDT Server;
-
Enabling remote monitoring of the connected sensor.
is in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions contained
in the product documentation:
a)
2014/30/EU EMC Directive
b)
1999/5/EC R&TTE (applies only the UMTS/HSPA module; Quectel UG96)
c)
2012/19/EU Waste Electrical and Electronic Equipment (WEEE)
d)
2011/65/EU RoHS Directive
and that the standards and/or technical specifications referenced below have been applied:
a)
EMC-Directive:
EN 61000-6-2:2005/C11:2005
EN 61000-4-2:2009
EN 61000-4-3:2006/ A1:2008/ A2:2010
EN 61000-4-4:2012
EN 61000-4-6:2014
EN 61000-4-8:2010
EN 61000-6-4:2007/A1:2011
b)
R&TTE Directive: (applies only the UMTS/HSPA module; Quectel UG96)
EN 301 489-1 V1.9.2
EN 301 489-7 V1.3.1
EN 301 489-24 V1.5.1
EN 301 511 V9.0.2
EN 301 908-1 V7.1.1
EN 301 908-2 V6.2.1
Giesbeek, 02-Nov.-2016
Manufacturer:
Signature
Frank Tillmann
Huug Eijkelkamp
Managing Director
CCO
EC Declaration of Conformity*
Eijkelkamp Soil & Water BV
Nijverheidsstraat 30
6987 EM Giesbeek
The Netherlands
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial
environments
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 24:Specific conditions for IMT-2000 CDMA Direct
Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment
Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900
and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive
(1999/5/EC)
IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE
Directive; Part 1: Introduction and common requirements
IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE
Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
Electrostatic discharge (ESD) immunity test
Radiated, radio-frequency, electromagnetic field immunity test
Electrical fast transient (EFT)/ burst immunity test
Immunity to conducted disturbances, induced by radio-frequency fields
Power frequency magnetic field immunity test
26
Publicité
Table des Matières
