LaserLiner DampMaster Compact Plus Mode D'emploi page 33

Functional and operational safety is only warranted when the instru-
ment is operated within the specified climatic conditions and is only
!
used for those purposes for which it is designed. The assessment of
measurement results and actions taken as a consequence lie in the
user's scope of responsibility, depending on the given type of work.
Technical data
Measurement principle
Modes
Accuracy
Nominal temperature
Operating conditions
Storage conditions
Radio module
operating data
Power supply
Dimensions (W x H x D)
Weight
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=damacopl
DampMaster Compact Plus
Resistive material moisture measurement
by way of integrated electrodes
3 wood groups, 8 building materials
Index mode for 23 additional building materials
Test mode
Wood: ± 0.3% from the end value ± 5 digits
Baustoffe: ± 0,5% v.E. ± 1 Digit
23°C
0 ... 40°C, 85%rH, no condensation,
max. altitude 2000 m
-10 ... 60°C, 85%rH, no condensation
Bluetooth LE 4.x interface
Frequency band: ISM band 2400–2483.5 MHz,
40 channels
Transmission power: max. 10 mW
Bandwidth: 2 MHz
Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS
Batteries, 4x 1.5 V type AAA
58 mm x 155 mm x 38 mm
186 g
Technical revisions reserved. 03.17
33
EN