LEITZ 6217 Mode D'emploi page 6

Assembly
•
Slide in the mains plug insert, as shown in the figure
(see page 2).
•
Make sure that the insert engages audibly and safely.
Charging devices
m
CAUTION!
•
Charge your devices in accordance with the instruc-
tion manual of each device. Follow all safety instruc-
tions given there.
•
Make sure that the maximum permissible charge cur-
rent of 2.4 A is not exceeded.
1. Connect the device you wish to charge to one of the
charging ports on charger.
For this purpose, use the USB cable that came with your
device, or another USB cable that is suitable for charging.
(Some USB cables are designed for data transfer only).
2. Plug the charger into a suitable, easily accessible mains
power socket.
3. Remove the charger from the mains power socket when
charging is completed.
6
EN