Ontractor : How To Install A Skuttle Model 60-Series Steam Humidifier; Safety Precautions - Skuttle Indoor Air Quality Products 60 Serie Instructions D'installation

For the Contractor: How To Install
a Skuttle Model 60-Series Steam Humidifier
NOTES: This humidifier must be installed by a qualified professional
contractor. Failure to comply with this requirement may nullify the
warranty.
Read all instructions before beginning installation of the humidifier. Skut-
tle Manufacturing Company assumes no responsibility under warranty if the
contractor and user do not follow these printed instructions.
FOR WIRING INSTRUCTIONS AND INSTALLATION OF THE ELECTRONIC
COMPENSATING HUMIDISTAT, PLEASE SEE SEPARATE INSTRUCTIONS
ENCLOSED IN THE HUMIDIFIER CARTON.

Safety Precautions

1.
Do not install a humidifier where the surrounding temperature may exceed
200°F.
CAuTION: Excessive heat will damage the humidifier, possibly causing
an overflow condition and water damage to the home.
2.
Do not install a humidifier where the surrounding temperature may be 32°F
or colder (e.g., attics, garages, etc.).
CAuTION: Freezing water will damage the humidifier and burst the sup-
ply pipe, resulting in damage to the home.
3.
Do not cut or drill into any air conditioning components or electrical enclo-
sures during humidifier installation.
dANgER: Electrocution is possible if you come in contact with a live
electrical wire; blindness can occur if refrigerant contacts your eyes.
4.
When the humidifier is installed in a finished basement or any area where
water damage could occur, be sure to connect the humidifier's overflow
provision to a suitable drain.
5.
For above-ceiling installations, install an additional drain pan plumbed to a
suitable drain.
6.
Installation, wiring and plumbing of the humidifier must comply with local
codes, ordinances and regulations.
6