Connecting Headphones - THOMSON 27LB125B5 Manuel D'utilisation

It is also possible to connect to an appliance fitted with a DVI socket using a HDMI/DVI cable.
For audio transmissions, it will be necessary to connect the DVI Audio In sockets to the Audio Out sockets of the appliance
connected.
To display images from the connected appliance, select HDMI/DVI using AV button on the remote control.
According to the connected device, select Video or PC at the DVI input line of Préférences menu (see page 18)..
HDMI, the HDMI logo and "High-Definition Multimedia Interface" are trademarks or registered trademarks of
HDMI Licensing LLC."
Connecting active speakers or an amplifier (using a jack / CINCH cable not provided).
The audio stereo jack socket located on the back of the LCD TV set can be used to connect active speakers (with
a built-in amplifier) or an amplifier.
Connect the left and the right speaker to the stereo jack socket using a jack / CINCH cable (not provided).
To connect an amplifier, you should connect the LCD TV set's stereo jack socket to the amplifier's L and R inputs
using a jack / CINCH cable (not provided).

Connecting headphones

Use the relevant socket on the right side of the LCD TV set to connect headphones or stereo earphones.
YCrCb/YPrPb component and Audio (R/L) (input)
YCrCb/YPrPb is for interlacing signal and mainly be used to connect DVD player.
To display images from the connected appliance, select YCrYb/YPrPb using AV button on
the remote control.
VGA (for PC) and Audio (input)
LCD TV uses D-Sub (15 pin) connector for PC
Connect the stereo sound input jack (VGA AUDIO), on the back of the LCD TV (near
the VGA connector), to the audio output terminal of equipment.
To display images from the connected appliance, select VGA using AV button on the remote
control.
HDMI and DVI Audio input (R/L) (input) (Depending on model)
High-Definition Multimedia Interface.
This socket allows the connection to all appliances fitted with a HDMI socket.
The standard HDMI allows a digital transmisson of video and audio data using only one
connector.
It gives you the possibility to obtain very high quality images. In this case it is necessary
to use a HDMI connecting cable.
input.
22