Appliance Description; Before The First Use - Inventum DH2600 Mode D'emploi

2

appliance description

1. Operating panel
2. Freezer compartment with cover
3. Freezer drawers
4. Small freezer drawer
5. Adjustable feet
6. Door
7. Handle
3

before the first use

Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of the
reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is
enough space all around for sufficient ventilation. A minimum space of
10 cm is required between the appliance and the surrounding walls and
keep 30 cm clear above the appliance. In this way the appliance is able
to release heat properly, cool well and function in an energy efficient way.
You can use the adjustable feet to level the appliance. Do not place the
appliance near heat sources such as central heating or a stove. Do take
note of the climate class of the appliance. When placed in a room that is
too cold, the freezer will not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours.
1
2
3
4
5
7
6
21
English •