Kobalt 1500 PSI Mode D'emploi page 8

ASSEMBLY INSTRUCTIONS
5. Connect the other end of high pressure hose (E)
to spray gun (F) by inserting the silver metal tip
of high pressure hose into the fitting just ahead
of trigger guard. It will lock into spray gun with a
"click". Confirm hose is locked into spray gun
by slightly pulling on them. The hose is now
securely attached to spray gun.
6. To release hose (E) from spray gun (F), press
button on underside of gun toward trigger
guard. The hose will slide out from connection.
Locking Spray Gun (before Lance installation)
7. To lock trigger of spray gun (F), point gun away
from you and press top half of lock button to
engage lock. Squeeze or pull trigger to make
sure it is locked. ALWAYS leave lock button in
locked position when not in use. This ensures
the gun is in "safe" mode until it is ready for use.
To unlock, press bottom half of lock button to
release.
Note: The trigger lock prevents trigger from
being accidentally engaged.
5
6
7
8
F
E
F
E
2
F
F
kobalttools.com
Unlock
Lock