Up1; Up2 - Galileo VP121 Mode D'emploi

owner's manual
(F5)Decay Env.
This new function enables you to select two different modes for the damper pedal for the
decay of strings, pads, organs etc. sounds. If using dual sounds (piano+strings) for example,
you can select DECAY ENV. ON (which is the factory default), allowing the string sound to
decay at a pre determined decay envelope. By turning this feature to OFF, the Strings, (Pads,
Organ etc.) will remain "held" until you release the damper pedal.
Pressing the DATA button the display shows the current value (ON by default).
(F6)Transpose Lower
This function allows you to traspose the Lower part.
Pressing ENTER button the displays the current
value, Default: 0. (No traspose)
Press the TEMPO/DATA button to edit the value
(-3, -2, -1, 0, +1, +2, +3)
(F7)Transpose Upper
This function allows you to traspose the Upper part.
Pressing ENTER the display shows the current value,
Default: 0. (No traspose)
Press the TEMPO/DATA button to edit the value (-
3, -2, -1, 0, +1, +2, +3)
(F8) MIDI
This function allows you to edit the piano MIDI confi
gurations on your piano.
The ENTER button allows you to choose one of these
functions:
UP1 - UP2 - BAS - FIL - LOC
Select a function by using the TEMPO/DATA button.
Press ENTER to edit the function.

UP1:

This function allows you to edit the Upper 1 MIDI IN/OUT confi guration. (1-16).
Default: MIdi channel 1.
Edit the the value using the TEMPO/DATA buttons.
Press ENTER to confirm.

UP2:

This function allows you to edit the Upper 2 MIDI IN/OUT confi guration, (1...16).
Default: MIdi channel 2.
Edit the the value using the TEMPO/DATA buttons.
Press ENTER to confirm.
Set OFF using the DATA buttons.
TEMPO/DATA
TEMPO/DATA
TEMPO/DATA
VP121
TEMPO/DATA
Function
Enter
PROGRAM
EN 11