Environmental Notice - Braun 195s-1 Mode D'emploi

or abrasive substances. Rinse off all foam and let the shaver run for a few more
seconds.
• Next, switch off the shaver and press the foil release buttons (3). Remove the
shaver foil and the cutter block. Then leave the disassembled shaving parts to
dry.
Alternatively, you may clean the shaver using a brush:
• Switch off the shaver. Remove the shaver foil and tap it out on a flat surface.
Using a brush, clean the inner area of the shaver head. However, do not clean
the shaver foil nor the cutter block with the brush as this will damage them.
Keeping your shaver in top shape
If you regularly clean the shaver under water, then once a week apply a drop of
light machine oil onto the long hair trimmer and shaver foil.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity.
Replacing the shaving parts
To maintain 100% shaving performance replace your foil and cutter block at least
every 18 months or when worn. Change both parts at the same time for a closer
shave with less skin irritation.
(Shaver foil and cutter block: 30B)

Environmental notice

This product contains rechargeable batteries. In the interest of
protecting the environment, please do not dispose of the product in the
household waste at the end of its useful life. Disposal can take place at a
Braun Service Centre or at appropriate collection points provided in your
country.
Subject to change without notice.
Electric specifications see printing on the special cord set.
6
96621369_199s_S4-70_CEE.indd 6 96621369_199s_S4-70_CEE.indd 6
OVED Effective Date 3Feb2014 GMT - Printed 29Sep2015 P
30.01.14 15:05 30.01.14 15:05