Environmental Notes - GNC Power Moon Manuel D'installation, D'utilisation Et De Maintenance

ENG
POWERMOON
INSTALLATION, USE AND MAINTENANCE MANUAL
1. COPYRIGHT
The contents of this manual may be changed by the manufacturer without notice or additional obligations, in order to include changes and improve-
ments. Reproduction or translation without the written consent of the manufacturer is prohibited.
The manufacturer is constantly looking for new solutions that lead to the evolution of products. We therefore reserve the right and duty to make
changes to the equipment supplied in terms of form, equipment and technology.
2. PRESENTATION AND GUARANTEE
POWERMOON is a highly technological product that aims to satisfy functional, aesthetic and energy saving needs. The device is designed and manu-
factured entirely in Italy with solid and refined materials. The manufacturer guarantees its products for 24 months, in compliance with current legis-
lation. Any warranty work will be carried out exclusively at the manufacturer's premises. The transport and return of the equipment are charged to
the customer.
The manufacturer assumes no responsibility for the unreliable operation of the product, and therefore does not extend the warranty if:
• assembly has not been carried out according to the specific manufacturer's instructions
• modifications and repairs are not carried out by a GNC service technician or by personnel authorized by GNC;
• the appliance is not used in accordance with its intended use and with the standards and instructions for use.
To make the guarantee operational, it is sufficient to keep the fiscal document of purchase (invoice or speaking tax receipt).
3. SAFETY WARNINGS
Carefully read the warnings contained in this manual as they provide important information regarding safety in the installation, use and maintenance
of the product.
3.1 CLASSIFICATION AND DESTINATION OF USE
This is a low voltage device, IP 20 protection rating, suitable for normal use. The device is designed to be connected to the SilverMoon series lamps
for the management of the lighting level and effect simulation for the sunrise and sunset.
3.2 ENVIRONMENTAL CONDITIONS
During operation, the ambient temperature must be between 10 ° C and 40 ° C, atmospheric pressure between 700 and 1060 hPa. The appliance
must be placed in a position protected from water.
3.3 SAFETY TECHNICAL CONDITIONS
The safe use and proper functioning of the device is guaranteed if:
• The device is not subjected to inappropriate strain;
• the electrical system of the rooms concerned has been built according to the state of the art and complies with the regulations in force in the
country of use;
• Modifications or maintenance to the appliance are carried out by GNC authorised personnel;
• The unit has been installed and started up according to the correct installation instructions.
Do not lean on or place any objects on the body of the device as this will no longer ensure safe operation. Do not cover the unit during operation as
this will prevent heat exchange with the environment and may lead to overheating of parts of the unit..

3.4 ENVIRONMENTAL NOTES

Pursuant to art. 13 of the Decree Law of 25 July 2005, no. 151 "Implementation of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC
on the reduction of the use of hazardous substances in electrical and electronic equipment and on waste disposal", the equipment is considered
"Waste Electrical and Electronic Equipment" (WEEE). At the end of its useful life, the product must be disposed of separately from other waste
through authorised collection points.
4. DESCRIPTION OF THE APPARATUS
The device is designed for connection to lamps of the SILVERMOON series. It is equipped with a SUPERCAP device that, in the absence of power
supply, allows to keep all the data set for more than six hours. The appliance should not be covered as this would prevent heat exchange with the
environment and could lead to overheating of parts of the appliance.
5. INSTALLATION
POWERMOON is designed to connect up to 4 bars using 4 numbered cables with DC jacks. Through POWER CONTROL it is possible to set the time,
program the light levels of the 4 channels and the sunrise and sunset scenarios in addition to the management of the DEMO function and the Mas-
ter/Slave status setting in case of use in synchronization with AirLink. For wall mounting of the Power Control, two black plastic bushings are supp-
lied for correct spacing.
6. MAINTENANCE AND CLEANING
The device is maintenance-free. The use of liquid substances to clean the product is forbidden.
7. TECHNICAL DATA
Single Channel Power: 24vdc x 2.5A
Operating temperature 10 - 40°C
Dimensions POWER CONTROL 100x75x20 mm
Dimensions POWERMOON 105x56x20 mm