Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VOKKERO GUARDIAN EUROPE Standard | Plus | Ref | User Guide V2.1.2
3.4.7.
By default, the side tone is disabled. To activate the side tone, press and hold the centre of the volume knob.
The product then displays the side tone menu. To choose among the following options toggle the trigger:
•
Side tone disabled (OFF)
•
Side tone volume 1, 2 or 3
The system automatically exits the menu after a few seconds.
We do not recommend using the side tone (especially at high-level) if you use a Push-to-Talk other than the
one you can set up and run on the terminal (if, for example, you use a Push-to-Talk from an accessory headset).
EN
3.4.8.
The Bluetooth function is used to send and make phone calls whilst remaining on the work device. This function can also
be used to connect a Bluetooth wireless headset.
You can only pair one Bluetooth device per terminal; reconnection takes place automatically on restarting the
terminal.
Pairing with a mobile phone:
•
Open the Bluetooth device manager on your mobile phone (if necessary, consult the user guide of your
mobile phone for more information on connecting a Bluetooth-enabled device).
•
As soon as your mobile phone is ready to detect new devices, press and hold the Bluetooth key of the
VOKKERO Guardian terminal; the indication "Guardian Pairing" should display on the LCD screen.
•
You should see a new Bluetooth device with the name of your terminal (Guardian, by default) on your
mobile phone.
•
Select this device to terminate pairing.
Pairing with a Bluetooth headset:
•
Start the pairing mode of your headset (if necessary, consult the user guide).
•
As soon as your headset is ready to detect a new device, press and hold the Bluetooth key of the VOKKERO
Guardian terminal.
•
Complete the pairing by following the procedure of your Bluetooth headset.
As soon as the pairing has been completed, the Bluetooth icon displays on the screen of your terminal; you can
now send and receive phone calls via your terminal.
Making a phone call
To make a call from your mobile phone, you use the telephone interface (consult the User guide of your mobile
phone for more information). It is not unusual to have to select "Bluetooth headset" on your mobile phone in
order to switch the au-dio communication to the Bluetooth device.
During a phone call, the terminal's LCD screen displays a blinking icon for the duration of the call.
Receiving a phone call
Si vous recevez un appel téléphonique, le terminal vibre et un double bip est émis dans l'accessoire micro-
casque.
•
To answer the call, press the Bluetooth button.
•
To end the call, press the Bluetooth button.
During the phone call, the terminal's LCD screen displays a blinking icon for the duration of the call.
Side Tone
Bluetooth (Option)
48 / 122
Publicité
Table des Matières
