English - Flair Taygeta Mode D'emploi

GB
Assembly instructions
I.
Description
1 Luminaire
2 Power supply terminal
3 Screws to lift up the mounting
bracket
4 Mounting bracket
5 4 x Screws and plugs
II.
Assembly
1. Select an installation location on
floor without pipes or cables un-
der it. Mark the fastening holes
and drill them.
2. Insert the plugs. Insert the
connection cable through the
centre hole and pull out the
power supply terminal. Fix the
mounting bracket.
Caution: Make sure the
screws and plugs are
suitable for the supporting
material.
Connect the luminaire to the
power supply (see section III).
3. Mount the luminaire onto fasten-
ing bracket.
18
Please read these instructions
carefully and keep them safe
for later use!
Safety information
• Electrical work and repairs must be
performed by a qualified electrician.
• During installation, always observe
the national installation regulations.
• The luminaire must not be modified
in any way. Risk of electric shock
and accident.
Technical data
Nominal voltage: 100-240 V 50/60 Hz
Rated power: 10.5 W
Protection class:
I /
Degree of
protection: IP54
Colour temperature: 3000 K
Light source: LED - non-replace-
able!
Size:
6142759 300 x 90 x 500 mm
6143211 300 x 90 x 800 mm
Used symbols
Caution: Risk to health and the
product.
Cannot be dimmed.

ENGLISH