Sonnenkonig AIR FRESH 5 S Mode D'emploi page 67

3.Why is no mist sprayed,
even if the indicator lamp
lights up and the fan
functions?
4.Why does the mist have
a strange odor?
5.Why does the fan not
work?
6.Obvious vibrations.
7.Another unusual prob-
lem.
a.No water or water level
too low.
b.Float not floating on
water.
c.Surface of ultrasonic
converter encrusted.
d.Clamping plate of water
level switch loose.
e.Ultrasonic converter
damaged.
a.Funny smell of a new
product disappears after a
certain period of use.
b.Dirty water or water
has been standing for too
long.
a.The power plug may be
damaged or the fuses may
have blown.
b.Printed circuit board
damaged.
a.The rear protective
housing is loose.
b.The blade hub has
become loose.
c.The blade is damaged.
d.The blade is imbalanced.
a.Smoke or the smell of
fire comes from the motor.
b.Exposed metal parts,
electrical system or fan
insulation damaged.
c.The rear motor housing is
damaged.
67
a.Fill with water.
b.Remove float and refit it
in position.
c.Clean ultrasonic convert-
er with supplied detergent.
d.Refit clamping plate of
water level switch.
e.Replace ultrasonic
converter.
a.Remove tank and open
tank cover; allow to dry at
a dry ventilated place.
b.Clean water tank and
outlet channel and fill with
fresh water.
a.Make sure the power
plug works and check the
fuses.
b.Replace printed circuit
board.
a.Fix the rear protective
housing.
b.Tighten the blade hub.
c.Fit new fan blade.
d.Turn fan blade through
180° and then refit the
blade.
a/b/c.Disconnect the
appliance from the mains
and return to the seller for
repair.
EN