Connecting To Another Source - Elipson Prestige Facet PF 14F BT Mode D'emploi

UK
VII. CONNECTING TO ANOTHER SOURCE
CHANGING THE INPUT
Pair Reset
Aux 1 Aux 2
Opt
Inputs can be selected with the supplied remote control or with the «Volume Adjustment» on the back
of the speaker.
AUX2 INPUT : JACK 3.5 MM
Plug our domestics devices (MP3,smartphones,laptop,...) with help of 3.5mini jack to the
AUX2 input
WARNING : When connecting audio cable, make sure that your speakers are turned off.
DIGITAL OPTICAL INPUT
OPTICAL Out
To use the «optical» input to connect our digital devices with help to optical cable. You can
get a better audio quality with this input.
30
SUBWOOFER OUTPUT
SUBWOOFER In
If you need more bass, you can connect a powered Subwoofer to your Prestige Facet by using
an analog RCA cable.
AUX1 INPUT (LINE)
Connect any audio analog stereo source with RCA cable.
WARNING : When connecting audio cable, make sure that your speakers are turned off.
AUX1 INPUT (PHONO)
Connect your turntable to the RCA - AUX.1 input. Make sure that the phono or line input selector
is in «PHONO» position.
WARNING : Connect the ground wire of your turntable to the ground phono input of the speaker
31