Elipson Prestige Facet PF 6B Mode D'emploi page 10

UK
Thank you for choosing an Elipson audio product.
Please read carefully the following information before using your new loudspeakers.
It contains tips to get the most of it and instructions for safety use.
We strongly recommend that you keep the packaging and this user manual for further use.
Dear Customer,
18
I. CONTENT
• 1 speaker : • 1 removable base (PF8B, PF14F, PF24F, PF34F, PFSUB8, PFSUB10, PF14C)
PF14F / PF24F / PF34F/ PFSUB8 • 1 removable magnetic grid
PFSUB10 / PF11C/ PF14C • 4 screws (PF8B, PF14F, PF24F, PF34F,PFSUB8, PFSUB10, PF14C)
• 2 speakers : • 1 user manual
PF6B / PF8B / PF6ATM / PF7SR • 4 rubber pads per speaker
(PF6B,PF8B,PFSUB8, PFSUB10, PF11C,PF14C,PF6ATM,PF7SR)
• 4 decoupling spikes per speaker (PF14F, PF24F, PF34F)
II. PREPARATION
1a
1a. Mounting the removable base on the cabinet (PF8B, PF14F, PF24F, PF34F, PF14C)
Carefully turn the cabinet over and place it on the packaging foams, or on a carpet,
to avoid any damage on the top part. Take care not to damage the woodworking, the
lacquered front or the loudspeakers during this operation. Adjust the base on the cabinet
and screw it using the four provided screws.
1b. Mounting the removable base on the subwoofer cabinet (PFSUB8, PFSUB10)
Start by positioning the aluminum cylinders in the recesses provided for this purpose. Place
the base on the cylinders and secure with the provided screws.
2a
2a. Sticking the rubber pads (PF8B, PF14C, PFSUB8, PFSUB10)
We recommend that you stick the rubber pads, provided with the removable base, on
the loudspeakers. If you use the loudspeakers without the removable base, you should
place the rubber pads on the provided inserts, to avoid any damage.
As a rule, you can stick the rubber pads under the loudspeakers or under its base in order
to protect the loudspeaker itself and its base.
2b. Putting spikes (PF14F, PF24F, PF34F)
After mounting the base of the speaker, screw the spikes on it (no required tools).
Note : The presence of pads or decoupling spikes prevents vibrations to be transmitted to
the floor.
1b
2b
19