KPS -MF50 Manuel D'instructions page 15

KPS-MF50 • Enviromental tester
- This button is used to the switch of MAX,MIN,AVG and DIF (MAX-MIN) value
measure.
• UNIT Button
- This Button is used to transform the units of the measurement.
• SET Button
- This Button is used to setting the parameter of the meter..
• TEMP/%RH Button
- This Button is used to the switch of Temperature and relative Humidity value
measure.
• Lux Button
- This Button is used to the switch of illuminance value measure.
• ANEMO Button
- This Button is used to the switch of wind speed or airflow value measure.
• dB Button
- This Button is used to the switch of sound level value measure.
2.3 LCD illustration
ºC, ºF
%RH
m/s, km/h,
FPM, Knots
CMM, CFM
ft2, m2
Centigrade, Fahrenheit indication.
Relative Humidity indication.
The unit of wind speed indication.
The unit of airflow indication.
The unit of area indication.
1
15