Aux Mode; Charging The D Fine; Power-Saving Function; Power Bank Function - Dockin D FINE Mode D'emploi

AUX MODE

You can connect your D FINE to a source device using the provided
AUX cable (3.5 mm plug cable).
The D FINE power-saving mode is disengaged when the AUX
cable is connected. If the AUX cable and the mains adapter are
connected, this permits stationary use, for example as a PC
speaker or a TV soundbar.
1. Connect the source device to the AUX input of your D FINE
using the provided 3.5 mm plug cable.
2. Start playback on the source device.
CHARGING THE D FINE
• Charge your D FINE by using the provided power cable. The
charging port is located behind the cover on the side.
During charging, the rechargeable battery status LED is
green.
Once the device is completely charged, the LED turns off.
If the rechargeable battery has less than 15 minutes of charge
remaining, the rechargeable battery status LED will be red.

POWER-SAVING FUNCTION

If there hasn't been any signal transmission or charging via the USB
output for 15 minutes, your D FINE turns off automatically. If the AUX
cable is connected, the power saving function is disabled. This allows
stationary use.

POWER BANK FUNCTION

The power bank function enables you to charge the source device
with your D FINE.
14