Remote Control; Description Of The Product - THOMSON SB300B Mode D'emploi

BLUETOOTH ® SOUNDBAR
EN
SB300B

REMOTE CONTROL

1 SOURCE Source input selection button.
2 Sound off function.
3 12 Bluetooth play and pause.
4 7 Bluetooth track backward.
5 TREBLE + Increases treble sounds.
6 TREBLE - Decreases treble sounds.
7 Increases bass sounds.
BASS +
8 Decreases bass sounds.
BASS -
9 Decreases sound volume.
q
10
8
11 Bluetooth track forward.
12 Sound environment selection (TV, music and cinema).
13 Surround sound function
14 Increases sound volume.
1
2
3
4
5
6
7
8
9
BATTERY INSTALLATION
USE
Be sure to point the remote control towards the infrared sensor on the front of the device.
There should be no obstacles between the device and the remote control for correct operation.
USE
INTRODUCTION
This devices allows the user to:
etc).
INSTALLATION
SPEAKER OUTPUT of the subwoofer and
of the sound bar input.
voltage indicated on the rear side of the product.
POWER at the rear side of the subwoofer and then ON to turn on the device. A red
indicator appears on the screen.
q
q to activate the stand-by mode or POWER at the rear side of the subwoofer and
then OFF to turn off the device.
CONNECTIONS
CD input
CD input (24) and (30
supplied).
TV input
SCART adapter with audio output (not supplied) to connect to your TV SCART
socket.
SCART adapter audio output to TV input (23) and (29) of the subwoofer using
Coaxial inputs 1 and 2 have exactly the same technical features.
of the subwoofer using a coaxial cable (not supplied).
disks, if necessary.
Optical input
using an optical cable (not supplied).
10
disks, if necessary.
Note:
11
12

DESCRIPTION OF THE PRODUCT

13
14
15
16
17
15
16 Source selection button.
17 LED display.
18 Decreases sound volume.
19 Increases sound volume.
20 Infrared sensor.
USAGE
Source input selection
SOURCE
CO1: Coaxial input 1.
CO2: Coaxial input 2.
OPT: Optical input.
CD: CD input.
TV: TV input
BLU: Bluetooth function
Volume setting
VOL+/-
63).
Sound setting
TREBLE +/-
BASS +/-
DSP to modify sound effects by choosing TV, Music or Cinema modes (E1, E2 or
E3).
Sound off mode
BLUETOOTH FONCTION
This device is capable of receiving an audio signal from a Bluetooth audio source device.
is supported.
COAXIAL 1 or 2 or BLU) mode by pressing SOURCE repeatedly.
THOMSON SB300B to synchronize the devices.
Note: Detection of THOMSON SB300B Bluetooth audio devices stops after 60 seconds if
OPTICAL of the subwoofer no device is connected. The following Bluetooth connection stages are provided only as
reference. Please refer to the instruction manual of the Bluetooth device for more details.
21
POWER AC 230V~50Hz
OFF ON
25 26
18
19
20
21 OPTIQUE Optical input.
22 COAXIAL Coaxial input 1.
23 TV TV audio input
24 CD CD audio input.
25 POWER
26 Supply cable.
BLUETOOTH READING FUNCTION
12
8 to play the next track.
7 to play the previous track.
DISCONNECTION/RECONNECTON TO THE BLUETOOTH AUDIO SOURCE
q to activate the stand-by mode and to switch off the Bluetooth device.
THOMSON SB300B on to automatically retrieve the last auxiliary device used.
Note: Simultaneous reception of music from two Bluetooth audio devices is not supported.
First disconnect the Bluetooth function of the associated auxiliary device, then launch a new
SB300B
SUPPLIED ACCESSORIES
22
23
1 TV CD
OPTICAL
24
L
COAXIAL 2
30
R
SPEAKER OUTPUT
28
29
27
27 SPEAKER
28 COAXIAL
29
30
31
THOMSON
31
Connections of the soundbar.
OUT
Coaxial input 2
TV TV audio input.
CD CD audio input.
Sound bar input.