Wall-Mount Installation (Half Flush-Mounted) - Furrion FF23SW15A-BL Manuel D'instructions

Installation
6. Align the six tabs on back of the glass
cover with the slots on the fireplace
and reattach the glass cover to the
fireplace. (Fig. 4)
Fig. 4
7. Do not block the ventilation areas.
(Fig. 5)
Fig. 5
Wall-mount Installation (Half
Flush-mounted)
1. Select a suitable location that is not
susceptible to moisture.
2. Mark and cut an opening in the
cabinet according to the dimensions
outlined in Fig. 6.
Cabinet Cutout Dimensions
Model
23" Series Fireplace
30" Series Fireplace
34" Series Fireplace
40" Series Fireplace
48" Series Fireplace
60" Series Fireplace
Fig. 6
3. Ensure the cabinet area is free of
dust and debris, remove fireplace
carefully from carton and discard the
plastic and foam packaging.
4. Lift to remove the glass cover from
unit and set aside. (Fig. 7)
Fig. 7
5. Install the fireplace into the cut out
area and secure with 4 mounting
A B C
211/4" 161/4" 5"
261/4" 161/4" 5"
309/16" 161/4" 5"
357/16" 161/4" 5"
5"
441/4" 161/4"
563/16" 161/4" 5"
B
C
A
8