Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note:
Water level must be between the MIN and MAX line.
After few days operation, dust and dirt may reserve
in water tank. It is recommended to change water and
clean water tank frequently.
5. Only use the unit with correct power required.
6. Insert the plug pin into a wall socket. A small beep sound can be heard, and the
power indicator will be on.
Note:
To protect against electric shock, do not remove plug from wall outlet by wet
hand.
Unplug from outlet while moving the unit.
Insert the plug pin into the wall socket and make sure it is connected well.
7. Press "ON" button to make the unit ready for working. Press "COOL" button to
improve the air damp, avoid skin dry and spall in winter. When press "COOL", the
built-in UV lamp start working, the ultraviolet ray can sterilize the water flowing
through the UV lamp cover (shown as fig.2).
WATER INLET
28
Publicité
Table des Matières
