GE GFC320V Manuel Du Propriétaire page 3

1. Attach a power cord, minimum 18" in length
and not to exceed 36" in length. Use GE Part
Number PM3X215.
or
2. Wire the disposer directly into the house
current.
1. These products are designed for household use.
2. Connect white wire to white lead of disposer with a wire nut. Connect
black wire to black lead of disposer with a wire nut. Connect bare
ground wire to the ground screw. The ground wire should be clamped
and held by a strain relief.
3. Do not use a rigid conduit for the wiring connection.
4. A dedicated acceptable motor switch, with the off position marked, shall
be provided for this disposer at the time of installation. The switch shall
be mounted in sight of the disposer or the sink opening for the disposer
To House Current
or Power Cord
Red Reset Button
Ground Screw
Wire Nuts
Remove
Bottom Cap