Regular Maintenance - Inverter 3026 CE Mode D'emploi

13. REGULAR MAINTENANCE

All cleaning and maintenance must be done after switching off the heater, disconnecting
the plug from the socket, and after waiting until the unit has cooled down.
CLEANING OF AIR FILTER (MORE THAN ONCE A WEEK)
Remove air filter from the unit, and clean it with vacuum
cleaner or a brush.
Caution: A clogged
combustion.
* After washing air filter, dry well before replacing.
* Do not run the unit without the air filter.
WARM AIR INTAKE (AT LEAST ONCE A WEEK)
Clean with vacuum cleaner or a brush.
Do not bend or tug the room thermo sensor.
Note: A clogged air intake reduces the volume of air, and
the overheat prevention device may be activated,
due to the high temperature in the unit..
CHECK THAT THE AUTOMATIC SHUT-OFF DEVICE IS OPERATING PROPERLY (ONCE OR
TWICE PER MONTH)
With your heater working, move it to see if the automatic shut-off device is operating.
Never try to take it down.
Never take the auto shut-off device apart.
MAINTENANCE OF THE WARM AIR OUTLET (ONCE OR
TWICE PER MONTH)
There may be an accumulation of dust on the top, around
the heater or on the warm air outlet
.First clean with a damp cloth, then with a dry duster.
CLEANING OF FUEL FILTER AND FIXED TANK (ONCE OR TWICE A SEASON)
If there is any water or dust in the fuel filter or fixed tank, the following situation may
occur, even if there is sufficient fuel in the tank.
Does not ignite ________________________
-
Flame lengthens and gives off odours.
-
Switch off during operation
-
air filter causes
___
61
incomplete