Mounting An Iot Sensor Hub; Mounting A Camera - Sharp PN-CD701 Manuel D'installation

It is possible to mount an IoT sensor hub in the following position.
IoT sensor hub
mounting bracket
1
2
*
Micro USB cable
It is possible to mount a camera in the following position.
S/PDIF cable (supplied)

Mounting an IoT sensor hub

Mounting a camera

USB A to B cable
(supplied)
3.5 mm mini jack to
USB A cable (supplied)
1. Attach the supplied IoT sensor hub mounting brackets
(L/R) to the IoT sensor hub with the supplied IoT
sensor hub screws (M3) (x2).
2. Fix the IoT sensor hub mounting brackets (L/R) to this
monitor with supplied knurled screws (M3) (x2).
* The IoT sensor hub mounting brackets fit into the recess
of this monitor.
1. Attach the supplied camera with the supplied knurled
screws (M3) (x2).
The camera can be tilted downward.
TIPS
• The cable clamp (supplied) can be used to clamp the 3.5
mm mini jack to USB A cable (supplied).
• Attach the supplied cable clamp to a flat surface. Do not
attach over a vent.
• Remove any dust or dirt before attaching.
7
E