Radio Operation - Roadstar HRA-1500MP Manuel D'instructions

1 English
LOCATION OF CONTROLS
1. FM STEREO INDICATOR
2. VOLUME CONTROL
3. CD/MP3 DOOR
4. SPEAKERS
5. TUNING CONTROL
6. DIAL SCALE (MW/FM)
7. FM BAND DIAL SCALE
8. FUNCTION SELECTOR (MW/FM/CD-MP3)
9. AM BAND DIAL SCALE
10. CD CLUMPER
11. CD/MP3 LED DISPLAY
12. PROGRAM INDICATOR
13. PLAY/PAUSE INDICATOR
14. REPEAT BUTTON
15. PROGRAM BUTTON
16. CD/MP3 BACKWARD SKIP BUTTON
17. CD/MP3 FORWARD SKIP BUTTON
18. PLAY/PAUSE BUTTON
19. STOP BUTTON
20. FM ANTENNA
21. AC POWER CORD
22. AUX-IN INPUT
23. ON / OFF POWER BUTTON
24. -10 TRACK SKIP
25. + 10 TRACK SKIP

RADIO OPERATION

1. To switch ON, press the POWER button for 1 second.
2. Select the desired frequency band with the Function/Band Selector (8).
3. Tune to the desired radio station by turning the Tuning control (5).
4. Adjust the Volume control to the desired level.
5. To turn OFF the radio, press the POWER button for three seconds.
6. If the Radio station stop transmitting, the unit switch OFF itself after 15 minu-
tes.
Antenna
For FM reception there is a built-in FM antenna wire at the rear of the unit. Move
the wire around to obtain the best reception.
For MW reception the signals are picked up through a built-in ferrite antenna.
Your may have to orient the unit to obtain the best reception.