External Source; Sub Out - Scansonic R110 Guide D'instructions

External source

The R110 can playback signal from different external sources,
such as MP3 player, DVD, TV etc.
Always turn the volume down and switch off all devices, before
connecting external sources.
Coaxial (digital)
Connect the coaxial cable from the external source to the
coaxial connector (1) on the back.
Press Mode several times until the display shows Coax in, or
press COAX on the remote control.
Optical (digital)
Connect the optical cable from the external source to the
optical connector (2) on the back.
Press Mode several times until the display shows Opt in, or
press OPT on the remote control.
AUX (analogue)
Connect the RCAl cable (red and white) from the external
source to the line in connectors (L and R) (8) on the back.
Press Mode several times until the display shows AUX in, or
press AUX on the remote control.

Sub out

The R110 can provide signal to an active subwoofer.
Always turn the volume down and switch off all devices, before
connecting a subwoofer.
Sub out
Connect the RCA mono cable from the subwoofer to the
SubOut connector (3) on the back.
R110
12
1 2
Coaxial optical SubOut
Ethernet Wi-Fi Antenna Line in
3
Coaxial optical SubOut
Ethernet Wi-Fi Antenna Line in
8